MSHAR2AT-16-50
£1,177.85
£981.54
In stock
SKU
FT-MSHAR2AT-16-50
38.9mm OD x 1" ID Hydraulic Hose MSHA 100R2
38.9mm OD x 1" ID Hydraulic Hose MSHA 100R2
Application: Medium pressure hydraulic applications were MSHA approval and cetification is required. Specification: MSHA Approved, DIN 20022, EN853 - 2SN exceeds SAE100 R2AT. Construction: Inner tube: Oil resistant synthetic rubber (Nitrile). Reinforcement: 2 single steel wire braids. Outer coverr: MSHA approved oil and weather resistant synthetic rubber. Recommended fluids: Hose suitable for petroleum based hydraulic oil and water-glycol based fluids, air and water. NB: For air above 17 bar, the hose coverr must be pin-pricked. Available per metre. Smooth coverr available on request
BearingShopUK holds a large stock of Hydraulic equipment, including the MSHAR2AT-16-50 Range of Steel Braided.
Please allow 3-4 days for delivery from our Fluid Power Branch.
Please view the below PDF for more information,
TS5002
Application: Medium pressure hydraulic applications were MSHA approval and cetification is required. Specification: MSHA Approved, DIN 20022, EN853 - 2SN exceeds SAE100 R2AT. Construction: Inner tube: Oil resistant synthetic rubber (Nitrile). Reinforcement: 2 single steel wire braids. Outer coverr: MSHA approved oil and weather resistant synthetic rubber. Recommended fluids: Hose suitable for petroleum based hydraulic oil and water-glycol based fluids, air and water. NB: For air above 17 bar, the hose coverr must be pin-pricked. Available per metre. Smooth coverr available on request
BearingShopUK holds a large stock of Hydraulic equipment, including the MSHAR2AT-16-50 Range of Steel Braided.
Please allow 3-4 days for delivery from our Fluid Power Branch.
Please view the below PDF for more information,
TS5002
Write Your Own Review
Frequently Bought Together
Customers Who Bought This Item Also Bought