60M2L080A0150

80X150X3/8 BSP DBLE.ACTING CYLINDER
In compliance with ISO 15552 standards and with the previous DIN/ISO 6431 - VDMA 24562 standards. Rolled stainless steel rod. Adjustable pneumatic cushioning. Special designs available. Type of construction: with tie-rods. Operation: double-acting, single-acting, tandem. Low friction version: double-acting only. Materials: standard = aluminium end-blocks and piston, rolled stainless steel AISI 420B rod, anodised aluminium tube, zinc-plated steel tie-rods and tie-rod nuts, PU seals. Low friction = standard materials with NBR piston seal and NBR rod seal (FKM rod seal on request). Type of mounting: with tie-rods, with front/rear flange, foot mounting, with centre/front/rear/swivel trunnion. Strokes, min - max: 10 to 2500mm. Operating temperature: 0ﾰC to +80ﾰC (with dry air: +20ﾰC). Operating pressure: 1 to 10 bar (standard versions). 0.1 to 10 bar (low friction version). Speed: 10 to 1000mm/sec, no load (standard versions). 10 to 1000mm/sec, no load (low friction version). Fluid: filtered air without lubrication. For standard versions only: if lubricated air is used, it is recommended to use oil ISOVG32. Once applied, the lubrication should never be interrupted. Full range of ISO cylinders available including large bore (160, 200 and 250mm) and stainless steel options.
BearingShopUK holds a large stock of Pneumatics and Vacuum equipment, including the 60M2L080A0150 Range of Double Acting.

Please allow 3-4 days for delivery from our Fluid Power Branch.

Please view the below PDF for more information,
TS1842