1610 .3/4"Taperlock Bush
£5.46
£4.55
In stock
SKU
5214
To Suit Shaft Size: .3/4"
Bush Series: 1610
Large End Diameter: 57.15mm
Bush Length: 25.4mm
Keyway Size: 0.188in
Bush Series: 1610
Large End Diameter: 57.15mm
Bush Length: 25.4mm
Keyway Size: 0.188in
Taperlock Bushes are used to secure Taperlock Pulleys, Sprockets or Couplings to Shafts. This 1610 Series Taperlock Bush suits a shaft size of 19.05mm (3/4").
The Taperlock Bush fits into the hub with 2 grub screws, as the grub screws are tightened the Taperlock compresses onto the shaft and keyway securing the Pulley/Sprocket. To remove the Bush, you remove the 2 grub screws and screw one back into the third hole, lifting the Bush out.
Our Taperlock Bushes are made from Cast Iron, however Mild Steel or Stainless Steel can be supplied but are generally considerably more expensive.
**Please Note: Taperlock Bushes are meant for parallel shafts, not tapered shafts.
Please watch the short video below for more information:
The Taperlock Bush fits into the hub with 2 grub screws, as the grub screws are tightened the Taperlock compresses onto the shaft and keyway securing the Pulley/Sprocket. To remove the Bush, you remove the 2 grub screws and screw one back into the third hole, lifting the Bush out.
Our Taperlock Bushes are made from Cast Iron, however Mild Steel or Stainless Steel can be supplied but are generally considerably more expensive.
**Please Note: Taperlock Bushes are meant for parallel shafts, not tapered shafts.
Please watch the short video below for more information:
Write Your Own Review
Frequently Bought Together
-
£5.46 £4.55 -
£8.62 £7.18
Customers Who Bought This Item Also Bought
